- Bylaw No.1831, Tree Management Bylaw
- Guide to Tree Management Bylaw
- Tree Management Permit Application Form
The goal of the Tree Management Bylaw is to ensure the provision of a sustainable, healthy urban tree canopy within the City of White Rock. In order to achieve this goal, the Tree Management Bylaw prohibits the unauthorized removal of or damage to protected trees on private property in the City of White Rock. Where removal is deemed necessary, the Bylaw ensures that adequate replanting occurs.
The Engineering and Municipal Operations Department is responsible for issuing tree management permits as per Bylaw No. 1831. For more information on tree management on private land, please contact Engineering and Municipal Operations at (604) 541-2181.
Frequently Requested Information
Do I need a permit to cut or remove trees on my own property?
Refer to the City of White Rock Tree Management Bylaw No. 1831. This bylaw applies to specified areas of the City including “ravine lands”, “significant stands of trees areas” and “ecosystem enhancement areas” of the City. The maps attached to Bylaw No. 1831 identify whether or not your property is affected. This bylaw applies to all trees with trunk diameter of 30 cm (11.8 in) or greater measured 1.5 m (5') above grade, as defined in the bylaw.
Request for tree removal will require submission of an Arborists report and reasons for removal as outlined in the bylaw. Tree Management Permits for cutting and removal may be considered in the following situations:
- Type 1 - to remove a dead, diseased or hazardous "protected tree", or to remove a structural root within the critical root zone of a protected tree
- Type 2 - to remove an unwanted "protected tree" i.e. for example a nuisance tree or tree that is blocking views
- Type 3 - to remove a "protected tree" on a property in conjunction with a development proposal on a property under application for building permit, demolition permit, development permit or subdivision.
A tree management permit is not required for the pruning of a protected tree provided that the pruning is conducted in accordance with the standards and recommendations of the International Society of Arboriculture. Pruning shall not include:
- the lift pruning of lower limbs to the extent that the live crown ratio is less than 50%
- the removal of more than 25% of the crown in one season
- the pruning or removal of a structural root within the critical root zone of a protected tree
Removed Trees are Required to be Replaced
Except for dead or hazardous trees, the City has initiated replacement tree requirements with the objective of increasing the overall tree canopy in the City over time. The City will require the posting of securities for replacement trees prior to the issue of any permits, and prior to any tree cutting or removal. A minimum of two replacement trees will be required for one tree cut or removed, however, the number and size of replacement trees is actually dependent upon the size of the "protected tree" removed i.e. up to as many as six replacement trees for one tree of trunk diameter 85 cm cut or removed. Applicants will be required to submit a "coordinated site development plan (CSDP)" as outlined in Bylaw No. 1831.
To briefly summarize
Type 2 requests will require a plan or survey, drawn to scale, identifying the location, size and species of tree or trees to be removed, the location, size and species of replacement planting. The plan should also indicate the extent of dripline of trees, and the location of nearby buildings or structures. All applicants are required to indicate on the application form the reasons for the proposed tree removal.
Type 3 requests require the submission of a site survey or site plan, together with their application plans for development, and which also contains the following information:
- The location, size and species of all trees within the vicinity of the proposed construction. The extent of the dripline of the tree should also be indicated. All trees which are over 30 cm (11.8") in diameter (measured at 1.5m above grade) should be identified on the plan
- Tree grades (existing tree base elevations) for those trees that are affected by the proposed development, and spot elevations in the vicinity of the proposed development
- Identification of which trees are to be removed, replaced, or retained
- Location, size and species of replacement trees or other planting material
- Location of protective fencing to protect retained trees during construction activity (see Tree Protection Guidelines).
In the 'ravine lands' and 'significant stands of mature trees' areas, a Minor Development Permit [PDF - 42 KB] is required. In the 'ravine lands' area applicants will be required to provide geotechnical review to confirm that tree removal will not adversely impact soil stability. Applicants are requested to consult with Planning and Development Services Staff on applications in these areas.
If the tree to be removed is near an open watercourse, Provincial and/or Federal regulations may apply as well as special development permit requirements in accordance with Provincial Riparian Area Regulations. This can be confirmed with Planning and Development Services Staff.
How much does it cost?
Applications fees to the City for Type 2 and Type 3 requests are $500. The costs of all survey work, arborist's reports and coordinated site development plans will be borne by the applicants.Go to Top